American Black Bear Facts

The American black bear (Ursus americanus) is a large omnivore that inhabits the forests, swamps, and tundra throughout the more northerly reaches of North America. In some areas such as the Pacific Northwest, it commonly lives at the edges of towns and suburbs where it has been known to break into storage buildings or cars in search of food. Fast Facts: American Black Bear Scientific Name: Ursus americanusCommon Name: American black bearBasic Animal Group: MammalSize: 4.25–6.25 feet longWeight: 120–660 poundsLifespan: 10–30 yearsDiet: OmnivoreHabitat: Forested areas in Alaska, Canada, the United States, MexicoPopulation: 600,000Conservation Status:  Least Concern Description Black bears vary considerably in color throughout their range. In the east, bears are usually black with a brown snout. But in the west, their color is more variable and can be black, brown, cinnamon, or even a light buff color. Along the coast of British Columbia and Alaska, there are two color morphs of black bears that are distinct enough to earn them nicknames: the whitish Kermode bear or spirit bear and the blue-gray glacier bear. Although some black bears may be colored like brown bears, the two species can be distinguished by the fact that the smaller black bears lack the dorsal hump characteristic of the larger brown bears. Black bears also have larger ears that stand more erect than brown bears. Black bears have powerful limbs and are equipped with short claws that enable them to break apart logs, climb trees, and collect grubs and worms. They also claw apart beehives and feed on the honey and bee larvae they contain. Habitat and Range The American black bear lives in forested areas throughout North America, from Canada to Mexico and in at least 40 states in the U.S. They used to live in almost all forested areas of North American, but now they are restricted to areas that are less densely populated by  humans. In Canada, the American black bear still lives in most of its historic range, other than the central plains. These bears also once inhabited the mountainous regions of northern Mexico, but their numbers have dwindled in this region. Black bears are one of three bear species that live in North America; the other two are the brown bear and the polar bear. Of these bear species, black bears are the smallest and most timid. When encountered by humans, black bears often flee rather than attack. Diet Black bears are omnivores. Their diet includes grasses, berries, nuts, fruit, seeds, insects, small vertebrates, and carrion. In northern regions, they eat spawning salmon. American black bears will also occasionally kill young deer or moose calves. In the colder parts of their range, black bears seek refuge in their den for the winter where they enter a winter sleep. Their dormancy is not true hibernation, but during their winter sleep, they refrain from eating, drinking, or excreting waste for as long as seven months. During this time, their metabolism slows and heart rate falls. Reproduction and Offspring Black bears reproduce sexually. They reach reproductive maturity at 3 years of age. Their breeding season occurs in spring but the embryo does not implant in the mothers womb until late fall. Two or three cubs are born in January or February. The cubs are very small and spend the next several months nursing in the safety of the den. Cubs emerge from the den with their mother in spring. They remain under the care of their mother until they are about 1 ½ years old at which time they disperse to seek out their own territory. Conservation Status The IUCN classifies the American Black Bears conservation status as least concern.  And, the black bear is the most common bear in North America. However, all large mammals who eat meat—big cats, wolves, and bears—face threats stemming from the loss of prey and habitat. This includes black bears, though they are less affected because 95 percent of their diet is plant-based. American Black Bears and Humans American black bears across North America are also facing a decline in forest areas where they once lived due to the rapid expansion of urban areas. Indeed, most of the challenges black bears face in North America come from humans. American black bears are intelligent and learn quickly where they can find garbage left by people as well as where human food is easily accessible. This makes for the perfect conditions for human-bear conflict, according to the Wildlife Conservation Society. The problem is particularly pronounced in backcountry areas where humans hike and camp as well as populated forest areas, leading to dangerous conditions for black bears and humans alike. Sources â€Å"Black Bears.†Ã‚  WCS.org.â€Å"Basic Facts About Black Bears.†Ã‚  Defenders of Wildlife, 10 Jan. 2019.â€Å"Carnivore Collapse.†Ã‚  Defenders of Wildlife, 10 Jan. 2019.

Business Ethics - Final Exam - 2522 Words

Final Exam 1. Define what is referred to as an anti-fraternization policy. Draft a policy regarding employee fraternization, addressing issues which you deem important to include in such a policy (not to exceed one page). (Snoyenbos: 394) (DeGeorge: 226-232) (LA Times, 03 Feb 2007) Anti-fraternization policies aim to sidestep potential conflicts of interest that arise from work-related relationships involving people who are relatives or dating/marrying within the company. It is also designed to stop friendships within the workplace from decreasing productivity. While it is illegal for employers to stop their workers from fraternizing to discuss working conditions (LA Times, 03 Feb 2007), an ethical and effective policy should be put†¦show more content†¦Regardless of how you feel, all people are responsible for their actions and their foreseeable consequences. In terms of ethical limitations, there is a â€Å"role responsibility† to the duties that an agent takes on for his/her/its principal. When you take on a role, you also take on new responsibilities. In exercising these duties, no agent can justify being immoral. In the case that loyalty to one role creates a â€Å"clash of moral responsibilities,† it must be resolved in the same way that â€Å"clashes of comparable prima facie (first encounter) obligations are resolved.† 4. Using a teleological and deontological approach, discuss when is it ethically required to be a whistleblower (not to exceed three paragraphs)? (Snoyenbos: 379-390) (DeGeorge: 303-312, 313-317) It is ethically required to be a whistleblower when failure to â€Å"blow the whistle† results in any of the following: - Lives are endangered (due to improper service or maintenance) - Legalities are ignored (FAA regulations, federal or state law, etc.) - Moral obligation supersedes loyalty to the company There are times when whistleblowing is unethical, as well. Whistleblowing before going through the proper channels to address the issue is unethical. Such an act circumvents policy and works against any positive development while unceremoniously calling attention to an issue that might otherwise be handled internally. Whistleblowing is unethical if it is exploited forShow MoreRelatedBusiness 115 Final Exam Study Guide Essay1334 Words   |  6 PagesBUSN115 Final Exam Study Guide The BUSN115 final exam is 3 pages long. It is a timed exam worth 250 points that you may enter only once. You have 3.5 hours to complete the exam. It consists of 30 multiple choice questions worth 5 points each. There are 5 essay questions worth 20 points each. Be sure to save and save often while you are working on the exam, and submit the exam when you are finished. To earn full credit your response to each essay question should answer the question completelyRead MoreSP15 SCM 305 Syllabus1256 Words   |  6 PagesSchool of Business Course Syllabus – SCM 305 Business Decision Making Spring 2015, Wescoe 3140 1:00-2:15, Tuesday/Thursday Instructor: Joe Walden E-mail: joewalden@ku.edu Office: 118i Summerfield Office hours: Tuesday/Thursday: 9:00-11:30 PM; Monday/Wednesday 8:00-10:30; Or by appointment TAs: Jamie Mack Pamela Carper Deepa Anant Jill Carroll Angie Kim Course Description: This course is an introduction to decision making encountered in business and everydayRead MoreMy Future Plan For School And Become A Cpa1560 Words   |  7 PagesCPA, which means a certified public accountant, work in the field, then start my own business to help people who find themselves in a financial crisis. Therefore, becoming a CPA allows me the best opportunity to open my own business, and help the financially unstable of the world. Before becoming a CPA a few steps must be taken; one must go to an accredited college, complete the requirements to take the CPA exam, and provide the documents necessary. Foremost, an accredited college simply means aRead MoreEssay on Mgt 520 Final Exam Study1408 Words   |  6 PagesMGMT520 Final Exam Study Guide Finals open on Saturday April 20  at 12:01 a.m. MT (Saturday morning) Finals close on Thursday April 25 at 11:59 p.m. MT (Thursday night) PLEASE DON’T WAIT TILL THE LAST MINUTE – THE SYSTEM IS BUSY AND MAY SLOW DOWN AND ANYTHING CAN HAPPEN. YOU MAY WANT TO PRINT THIS GUIDE. 1. The final exam is open book, open notes. The maximum time you can spend in the exam is 3 hours, 30 minutes. If you have not clicked the Submit For Grade button by then, you will be automaticallyRead MoreBUSN115 Final Exam Study Guide1656 Words   |  7 Pagesï » ¿BUSN115 Final Exam Study Guide The BUSN115 final exam is 3 pages long. It is a timed exam worth 250 points that you may enter only once. You have 3.5 hours to complete the exam. It consists of 25 multiple choice questions worth 6 points each. There are 7 essay questions, 6 worth 15 points and 1 worth 10 points. Be sure to save and save often while you are working on the exam, and submit the exam when you are finished. To earn full credit your response to each essay question should answerRead MoreMaking A Certified Public Accountant Essay1529 Words   |  7 PagesFirst, get through elementary school, middle school, junior high and then graduate from high school. After high school, comes the decision of what college to attend. Once that decision is made, next comes what to study. It could be nursing school, business school, or any other school which is the toughest decision for some students. This report is based around accounting and what it has to offer. Accountants have many different jobs that they can do. Information to become a Certified Public AccountantRead MoreBecoming A Certified Public Accountant1720 Words   |  7 Pagesshort-goals. What I learned was that my goals and values in life stemmed from my past experiences and up-bringing as a child. My father brought me into the business of window cleaning at the early age of 14. As I improved my squeegee skills, I began to gain knowledge of a business that is run independently. I gained my knowledge of corporate business during my employment as a server in Outback Steakhouse. This assisted me on chosen a profession that would benefit me independently as well as the corporateRead MoreMy Assessment On Business Ethics Online Discussion On Board1504 Words   |  7 PagesIntroduction My assessment on business ethics online discussion on board I have to chose best tree in activity 1 to 12 and I have to make report format and describe on details what I understand of all I chose the tree each activity have 4/5 question . I have to define each question and in final I have to make report writing . Best three. ïÆ'Ëœ Behavioral ethics ïÆ'Ëœ bounded ethicality ïÆ'Ëœ conflict of interest I n this activity shows what are loop hole between employs and originations andRead MoreCis 336 Final Exam Questions with Answers645 Words   |  3 PagesCIS 336 Final Exam Questions With Answers http://www.homeworkwarehouse.com/downloads/cis-336-final-exam-questions-with-answers/ CIS 336 Final Exam Questions With Answers Question 1. Joe works for a company where the IT department charges him for the number of CRM login accounts that are in his department. What type of IT funding model is his company deploying? Question 2. This project cycle plan chart looks very much like a bar chart and is easy for management to read because of its visualRead MoreA Brief Summary of the Aicp Code of Conduct927 Words   |  4 Pageswhile engaged in all types of assurance, non-assurance services, and should apply to all auditing functions in any given business environment, including government and non-for-profit companies. Furthermore, I feel the three key elements of the code that all CPAs should adhere to are the Integrity and Objectivity Rule, General Standards, and Acts Discreditable Rule. As a final point, could these codes of conducts also correlate to any Ignatian element of Spirituality? The first code of conduct

I think that todays society is a half version o Essay Example For Students

I think that todays society is a half version o Essay I think that todays society is a half version of George Owells novel, 1984, in some ways it is similar and in others, uniquely different. The closest we come today to a Big Brother is the mob. The people are also controlled by watchful security cameras and subliminal messages. However, something in life today is very different from that of 1984, it is the people. In the words of the famous lyricist, Power to the People.In analyzing Big Brother, there are similarities between it and the mob. The Mafia is a crime family that can see everything, there is no going against the mob or else someone is going to die. The Mafia is so widespread that it has operatives all over keeping an eye out for cops or law enforcement, this is the Mafias telescreens (Orwell 6). Another startling similarity between the mob and Big Brother is the Mafias strange way of making someone disappear or vaporize (Orwell). Almost unknowingly a persons identity can be changed, altered, or deleted. Authorities use secu rity and surveillance cameras to observe criminal activities or possibly every day activities. Too much surveillance liberties are given to police or FBI. By using hi-tech cameras which can actually document a persons life. Unknowingly, there may be a cute little camera installed in the bedroom. Another way that todays society controls the masses is subliminal messages. Illegal now, subliminal messages were widely used in the entertainment business, especially during the fifties. An example is that movie makers would add a split-second commercial add for popcorn and soda during a movie. Customers would actually be manipulated into buying these products. Even though, this kind of brainwashing is illegal, it is still very hard to detect, whos to say that we are not bombarded by subliminal messages just by watching commercials on television. This is too risky, to think that a persons actions and emotions can be swayed by someone elses perversions. Again, this is very similar to 1984. Of all the things there are today that would make it impossible for there to be an inner or outer party, as in 1984, is that there is each other. No matter how hard our government tries, they cannot reach everyone. Contrary to 1984, where they do get everyone, I feel that was extreme and unlikely. I find it highly unlikely that a form of government can find a way to get the whole world to follow them. 1984 is not a reality, strength lies in numbers. In conclusion, life in the nineties, is a very resilient time. In this time, there is a substantial amount of restriction of the public, much of which is for law and order. A lot of this day and age may resemble George Orwells 1984. It is nothing but a facade of government mixing with technology at a dangerous level. Theres nothing to fear because 1984 is far-fetched and an anti-socialists nightmare.

Materials Requirement Planning at Space Age Furniture

Introduction Manufacturing companies are involved in the business of developing products from rudimentary materials.Advertising We will write a custom case study sample on Materials Requirement Planning at Space Age Furniture specifically for you for only $16.05 $11/page Learn More In this paper, the author evaluates Space Age Furniture as a model manufacturing company. The author analyzes the concept of Materials Requirement Planning (MRP) and how it fits into the manufacturing spectrum. To this end, an MRP that is ideal for Space Age Furniture is developed. A critical analysis of the case study reveals that the efficiency of Space Age Furniture as a manufacturing company can be improved through the adoption of a functional MRP. Consequently, the various elements of the recommended system are highlighted in this paper. Specifically, the author will start by developing an MRP for Space Age Furniture Company. The system will be formulated using the inform ation provided in the case study. Secondly, the author will recommend strategies that can be used to enhance sub-assemblies. To this end, lot sizes of one thousand will be used as the yardstick. In addition, the author will analyze how overtime and inventory expenditures are related. An innovative MRP will be determined. The aim is to enhance the base figure used by Space Age. A comparison between manufacturing processes will be made. The comparative analysis will be used to identify the recommended mode of operation. The comparison will be followed by a review of strategies that can used to monitor operations. Finally, the author will propose transformations that may benefit the company. The alterations are aimed at enhancing value for the consumer. MRP for Space Age Furniture Company Developing an MRP requires three main elements. The Bill of Materials (BOM), Master Production Schedule (MPS), and Gross Requirements are the constituent elements of an ideal MRP (Vonderembse White, 2013). In line with this, the following is the recommended MRP for Space Age Furniture:Advertising Looking for case study on business economics? Let's see if we can help you! Get your first paper with 15% OFF Learn More Table 1 Recommended MRP for Space Age Furniture WEEK ITEM 1 2 3 4 5 6 Gemini 600 400 700 500 400 600 Saturn 300 400 400 600 300 300 Ways of Improving Sub-Assemblies The quality of production for a given product is determined by the performance of the sub-assembly unit. According to Li and Li (2000), most manufacturing companies make use f the mixed model assembly line. From the case study, it is evident that the two sub-assemblies are development with the help of one machine. Consequently, Space Age wishes to reduce change over time. The objective will be achieved by setting a limit of 1,000 units per batch. However, it is important to note that the capacity of the equipment has not been compromised in any way. In this regard, the best way to improve the performance is to eliminate wastage in the production time. The first step in improving the efficiency involves configurations. Vonderembse and White (2013) point out to the fact that sub-assemblies do not require complex configurations. Vonderembse and White (2013) suggest that the efficiency of a sub-assembly is realised when the lot volume moves faster. To this end, the machining process should reduce edges on part. In addition there needs to be a reduction in the parts that are loaded. Essentially, simplifying the configurations is a sure way of improving the performance of the respective sub-assemblies. A manufacturing company always has plenty of sub-assemblies for ‘reuse’ purposes. In this regard, efficiency can be enhanced through ‘saving as part’ (Li Li, 2000). When a procedure is saved as part the entire sub-assembly is perceived as a single unit.Advertising We will write a custom case study sample on Materials Requirement Plann ing at Space Age Furniture specifically for you for only $16.05 $11/page Learn More According to Vonderembse and White (2013), this technique helps to eliminate unwanted details in the manufacturing process, thereby improving on the performance. Finally, removing all degrees of freedom is an almost certain technique in which the performance of the sub-assemblies can be realized. Li and Li (2000) argue that in most cases, sub-assemblies require addition of mates. In this regard, the nuts and bolts are always locked down. MRP requires a system that ensures complete mating of the areas that require the technique. Such a move eliminates the minus signs that emerge after the procedure has been carried out. Improving the Base MRP Existing MRPs are improved by incorporating additional elements in the computations. Under such circumstances, Vonderembse and White (2013) argue that the base MRP can be improved by obtaining the total number of stands made per week. The improvement is reflected in table 2 below: Table 2 Improving base MRP WEEK ITEM 1 2 3 4 5 6 Gemini 600 400 700 500 400 600 Saturn 300 400 400 600 300 300 Week 1= 600 + 300 = 900Advertising Looking for case study on business economics? Let's see if we can help you! Get your first paper with 15% OFF Learn More Week 2= 400 + 400 = 800 Week 3=700 + 400 = 1100 Week 4= 500 + 600 = 1100 Week 5= 400 + 300 = 700 Week 6= 600 + 300 = 900 The Trade-off between Overtime Costs and Inventory Costs An analysis of the trade-off between overtime and inventory costs is an avenue through which manufacturing companies satisfy their stochastic demands. According to Hamraz, Caldwell, and Clarkson (2013), manufacturing companies are required to meet the unmet demand through overtime production. Consequently, the cost trickles down to the inventory since the excess demand requires labor and materials to be produced. The case study cites Ed Szewczak, an employee, who earns $22 per hour. According to Vonderembse and White (2013), the figure translates to a 50% premium for any overtime work. From the case study, it is clear that production of section 3079 is unique. To this end, the process does not have a set-up time. However, the company has managed to ensure that normal processing does not exceed 0.03 hours for each item. Based on the estimates in the case study the inventory cost translates to $0.25 per week. There is also the expenditure associated with individual subassembly in accounts. The cost is $0.75 per unit per week (Vonderembse White, 2013). The analysis reveals that expenditure on overtime translates to increases in those associated with inventory. According to Hamraz et al. (2013), manufacturing firms can realize a reduced inventory costs by including a miscellaneous budget for when the demand exceeds the normal supply. Organizations that determine a blend between their inventory and overtime costs tend to perform better in a dynamic market. In this regard, Space Age Furniture is keen on improving their performance in this regard. As previously mentioned, the company has managed to ensure that normal processing does not exceed 0.03 hours per unit. Towards this end, the trade-off for overtime in favour of inventory costs becomes necessary. According to the MRP developed, it i s clear that the company’s major inventory costs is with respect to the numerous components required of the two stands (Vonderembse White, 2013). The inventory costs will ultimately go high given the single employee who has to work overtime. However, the base MRP needs to be re-evaluated to ensure that the cost remains within the workable limits Types of Production Processing Companies that engage in manufacturing are placed with the burden of transforming raw materials into viable products. In this regard, the element of production processing requires an analysis. According to Vonderembse and White (2013), there are three main types of production processing. The three include a job shop, batch, repetitive or continuous production. The efficiency of an organization is realized once the primary mode of operation in a plant is established. Consequently, an analysis of the respective production processing types is necessary. Job Shop Llewellyn and Tappin (2003) provides a worki ng definition of this concept. The definition is in relation to the application of the term in a manufacturing company. To this end, the concept is defined as a small manufacturing network. Once a specific task is completed, a job shop can carry out a different assignment from a totally different customer (Llewellyn Tappin, 2003). Job shops are characterized by machines depending on the available skill set. Consequently, this type of production processing is seen as being flexible since machines can handle multiple tasks. Batch There are manufacturing companies which carry out automated tasks without any manual interference. According to Llewellyn and Tappin (2003), such a technique is referred to as the batch process. In such cases, the production line is fed with a series of instructions to ensure that certain tasks are carried out without any form of human intervention. Vonderembse and White (2013) argue that the batch technique brings about better results when it comes to produ ction. The technique is able to produce high volumes of products. Repetitive Production During the manufacturing cycle, companies can produce a series of identical products. Such a technique is referred to as repetitive production (Vonderembse White, 2013). Companies that have adopted a repetitive production technique realise a reduced cost of inventory. A reduced inventory translates to low production costs. However, the establishment of a primary mode of production is the best avenue to evaluate the cost of production for a given commodity. Primary Mode of Production The three types of production processes provide the basis of how manufacturing companies operate. Nevertheless, the job shop is seen as the primary mode of production. According to Vonderembse and White (2013), the primary mode of production is where the major processing takes place. Of the three outlined, the job shop appears to the primary mode of production. The argument is supported by the fact that a job shop is responsible for the production of various parts albeit repeatedly (Vonderembse White, 2013). The batch and repetitive production are both crucial in hastening the production processes. However, Heim, Peng, and Shekhar (2013) describe a job shop as the main unit of production. Heim et al. (2013) argue that a job shop can produce any product en masse. In this regard, the primary mode of production should be seen from the basis of the content that is produced rather than the time taken. Keeping Track of Job Status and Location during Production Operation management entails the activities and procedures that evaluate the entire production process. Vonderembse and White (2013) point out that the job status and locations are essential in evaluating the efficiency of a production line. In this regard, a production plan comes in handy. To this end, the job status becomes well defined in the event that a company comes up with a production plan. The firm has just adopted an MRP system. The application has lowered inventory costs. Keeping track of the job status improves on-time deliveries. The job status in a manufacturing company entails the phase of production of a product. In the case of Space Age Furniture, everything in the master schedule is being produced for customer orders, so all products are shipped almost immediately (Vonderembse White, 2013). In this regard, the job status would be establishing the phase in which the respective components are produced. The use of tracking software allows the management to effectively establish the procedures of manufacturing. The job status allows a company to establish the inventory and demands. To this end, there needs to be an effective inventory audit to ensure that all the production phases are carried out within the necessary timelines. According to MacCarthy, Wilson, and Crawford (2001), the location of a product is essential in determining the delivery times to the consumer. Consequently, estimating the location can also take the form of computer software. Automated monitoring techniques are essential in estimating and managing the location of a given product. Automation is cost effective and fast. Recommended Changes The case study by Space Age Furniture Company alludes to the fact that two of its products (the Saturn microwave stand and the Gemini TV stand) have a component that requires machining. Changes may be made to the company’s operations on the basis of these indications. According to Vonderembse and White (2013), the components are prepared on a special lathe. The main problem was the overtime in which the machinist had to work to ensure efficient delivery of the two stands. The ideal solution in that regard would be the hiring of another machinist alongside another lathe (Vonderembse White, 2013). Manufacturing companies optimise their performance when there are multiple machines that can carry out a given function. In this regard, the recommendation to acquire an additi onal machine and an extra employee would greatly improve on the company’s performance. Heim et al. (2013) argue that asset acquisition is expensive especially when it comes to manufacturing. Consequently, the company can opt for an outsourcing program. Outsourcing helps to minimise the cost of production. As already mentioned, the major problem emerges when a single employee has to work overtime to produce more products. To this end, Llewellyn and Tappin (2003) argue that overtime costs can be avoided when a company decides to take advantage of the various shifts throughout the day. Evidently, the two stands are essential towards developing the various products of Space Age Furniture. Towards this end, the company can transfer the additional employee to a new shift to avoid the overtime costs. Such a move will greatly improve on the quality of service delivery. Conclusion At the beginning of this discussion it was stated that MRP is essential to realise effective performance of a manufacturing endeavour. According to Vonderembse and White (2013), MRP helps to improve the production line of an organization. The discussion reveals that the job shop is the primary mode of production. To this end, the MRP developed for Space Age Furniture is essential in determining the materials required for the production. However, there is need for further research on this subject to establish the appropriate criteria of developing MRP. Nevertheless the current paper has demonstrated that indeed MRP is critical to the improvement of the production efficiency. Companies with high inventory costs can always readjust their base MRP computations. References Hamraz, B., Caldwell, N., Clarkson, J. (2013). A holistic categorization framework for literature on engineering change management. Systems Engineering, 16(4), 473-505. Heim, G., Peng, X., Shekhar, J. (2013). Longitudinal analysis of inhibitors of manufacturer delivery performance. Decision Sciences, 45(6), 1117-1158. L i, H., Li, L. (2000). Integrating systems concepts into manufacturing information sciences. Systems Research and Behavioral Science, 17(2), 135-147. Llewellyn, S., Tappin, E. (2003). Strategy in the public sector: Management in the wilderness. Journal of Management Studies, 40(4), 955-982. MacCarthy, B., Wilson, J., Crawford, S. (2001). Human performance in manufacturing and service industries. Human Factors and Ergonomics in Manufacturing Service Industries, 11(4), 299-320. Vonderembse, M., White, G. (2013). Operations management. San Diego: Bridgepoint Education, Inc. This case study on Materials Requirement Planning at Space Age Furniture was written and submitted by user Silas Richards to help you with your own studies. You are free to use it for research and reference purposes in order to write your own paper; however, you must cite it accordingly. You can donate your paper here.

Self Critique Essay

Self Critique Essay Self Critique Essay Self Critique Essay: Get a High Grade Self-critique is always a difficult and unpleasant task to any person. Of course, who likes to be criticized. The answer is no one. However, if you treat the task of self-critique essay writing in a humorous way, it will not be so difficult for you to cope with the task, because of criticizing does not mean stating that the person is bad or good one. You do not have to enumerate just bad qualities of your personality. Self-critique does not mean presenting only poor sides of your character. You have to evaluate yourself in an objective way; that is a proper self-criticizing. Write Successful Self-Critique Essays! To succeed in completing the task of self-critique, we recommend you to speak to your parents, friends, and even teachers in order they to describe your personality. However, do not simply listen what they are going to say about you. Make notes of their words as you will find this information to be very useful while your self-critique professional essay writing online. After you have gathered enough information, it is recommended dividing it into two separate columns, which you can title, for instance, positive self-critique and negative self-critique. Write down this information according to these two columns and add your own point of view about yourself. After that, start writing your self-critique essay: However, it is not advised first to enumerate all your positive features of character and after that the negative ones, as it may seem to your professor that you either boasting or humiliating yourself. That is why we recommend you to mention several positive features of character and after that to state what you want to change in yourself and so one, and so force. The Format Of Writing Self-Critique Essay The scheme of self-critique work writing is one and the same with a scheme of all the other kinds of essays. Your essay should consist of three main parts, which are introductory part, body, and conclusion. Do not neglect any part of writing and pay proper attention to each of them. In your introductory part, write which aspects of your personality you are going to deal with in your self-critique writing. In the body, present your personality with the help of deep analysis of your features of character. In the concluding part sum up all the above-mentioned information and make a proper conclusion on the subject of which kind of person you are. Follow our pieces of advice and you will write a good self-critique work and receive a high grade for it. Popular posts: Analysis Case Studies Term Paper Editing Proofread Essay Editing Paper Term Critical Essay Editing

The Chemistry and History of Silly Putty

The Chemistry and History of Silly Putty Silly Putty is an amazing stretchy toy thats sold in a plastic egg. In the modern era, you can find many different types of Silly Putty, including types that change colors and glow in the dark. The original product was actually the result of an accident. Silly Putty History James Wright, an engineer at General Electrics New Haven laboratory, may have invented silly putty in 1943 when he accidentally dropped boric acid into silicone oil. Dr. Earl Warrick, of the Dow Corning Corporation, also developed a bouncing silicone putty in 1943. Both GE and Dow Corning were trying to make an inexpensive synthetic rubber to support the war effort. The material resulting from the mixture of boric acid and silicone stretched and bounced farther than rubber, even at extreme temperatures. As an added bonus, the putty copied newspaper or comic-book print. An unemployed copywriter named Peter Hodgson saw the putty at toy store, where it was being marketed for adults as a novelty item. Hodgson bought the production rights from GE and renamed the polymer Silly Putty. He packaged it in plastic eggs because Easter was on the way and introduced it at the International Toy Fair in New York in February of 1950. Silly Putty was a lot of fun to play with, but practical applications for the product werent found until after it became a popular toy. How Silly Putty Works Silly Putty is a viscoelastic liquid or non-Newtonian fluid. It acts primarily as a viscous liquid, though it can have properties of an elastic solid, too. Silly Putty is primarily polydimethylsiloxane (PDMS). There are covalent bonds within the polymer, but hydrogen bonds between the molecules. The hydrogen bonds can be readily broken. When small amounts of stress are slowly applied to the putty, only a few of the bonds are broken. Under these condition, the putty flows. When more stress is applied quickly, many bonds are broken, causing the putty to tear. Lets Make Silly Putty! Silly Putty is a patented invention, so specifics are a trade secret. One way to make the polymer is by reacting dimethyldichlorosilane in diethyl ether with water. The ether solution of the silicone oil is washed with an aqueous sodium bicarbonate solution. The ether is evaporated off. Powdered boric oxide is added to the oil and heated to make the putty. These are chemicals the average person doesnt want to mess with, plus the initial reaction can be violent. There are safe and easy alternatives, though, that you can make with common household ingredients: Silly Putty Recipe #1 This recipe forms a slime with a thicker consistency, similar to that of putty. Solution of 55% Elmers glue solution in waterSolution of 16% sodium borate (Borax) in waterFood coloring (optional)Ziploc bags Mix together 4 parts of the glue solution with one part of the borax solution. Add food coloring, if desired. Refrigerate the mixture in the sealed bag when not in use. Silly Putty Recipe #2 The glue and starch recipe may also be seen as a slime recipe by some people, but the materials behavior is much like that of putty. 2 Parts Elmers white glue1 Part liquid starch Gradually mix the starch into the glue. More starch may be added if the mixture seems too sticky. Food coloring may be added, if desired. Cover and refrigerate the putty when not in use. This putty can be pulled, twisted, or cut with scissors. If the putty is left to rest, it will pool out, like a thick liquid. Things to Do With Silly Putty Silly putty bounces like a rubber ball (except higher), will break from a sharp blow, can be stretched, and will melt into a puddle after a length of time. If you flatten it and press it over comic book or some newpaper print, it will copy the image. Bouncing Silly Putty If you shape Silly Putty into a ball and bounce it off a hard, smooth surface it will bounce higher than a rubber ball. Cooling the putty improves its bounce. Try putting the putty in the freezer for an hour. How does it compare with warm putty? Silly Putty can have a rebound of 80%, meaning it can bounce back to 80% of the height from which it was dropped. Floating Silly Putty The specific gravity of Silly Putty is 1.14. This means it is more dense than water and would be expected to sink. However, you can cause Silly Putty to float. Silly Putty in its plastic egg will float. Silly putty shaped like a boat will float on the surface of water. If you roll Silly Putty into tiny spheres, you can float them by dropping them into a glass of water into which you have added a little vinegar and baking soda. The reaction produces bubbles of carbon dioxide gas, which will stick to the spheres of putty and cause them to float. As the gas bubbles fall off, the putty will sink. The Solid Liquid You can mold Silly Putty into a solid form. If you chill the putty, it will hold its shape longer. However, Silly Putty isnt really a solid. Gravity will take its toll, so any masterpiece you sculpt with Silly Putty will slowly soften and run. Try sticking a glob of Silly Putty to the side of your refrigerator. It will stay as a glob, showing your fingerprints. Eventually it will start to ooze down the side of the refrigerator. There is a limit to this it wont run like a drop of water. However, Silly Putty flows.

Lab. report Essay Example | Topics and Well Written Essays - 2000 words

Lab. report - Essay Example There were two distinct kinds of images observed after the experimental procedure – the train images and the fork images. Both these original images obtained had high contrast with sharp edges and more detail. When some noise was added to the two original images, two types of noisy images for the train and the fork were observed. In addition, to smooth the images and reduce/ remove the noise in the noisy images, the moving average filter was employed on these particular images. The first span to smooth the noisy images was 10. The noise in both images was reduced, the images smoothed and the image details blurred when the first span was 10. With the moving average, however, the edges of both the images became blurred and when compared with the original images, the images with span 10 exhibited lesser contrast and detail. On the other hand, when the smoothed image with span 10 was compared with smoothed images with span 20 and 30, the smoothed images with span 10 exhibited the best results in terms of contrast and detail. The next span used was 20, where the noise in both images was eliminated and disappeared completely along with the images becoming smoother and the images edges more blurred hence a considerable difficulty discerning the image details. The resultant two images were, in addition, clearly more obscure. The third span used for both the image types was 30. Herein, the resulting images were smoother than the other images and more blurred too (in comparison with the other images). With span 30, the details of the smoothed images were unrecognizable with the edges more blurred than other smoothed images with span 10 and 20. Conclusively therefore, the moving average filter smoothes the image by blurring the image details with increase in average pixel value creating lower contrasts. In addition, smoothing reduces the noise level of the images. On the

Future for Purchasing Essay Example | Topics and Well Written Essays - 2250 words

Future for Purchasing - Essay Example But the situation changed with the introduction of Information technology, which brought significant changes in the dealings of business operations. The package it provided to an organization to overcome the limitations of traditional purchasing is 'e-purchasing'. Viewing the importance of E-Purchasing the paper tries to bring about some information on e-purchasing but specifically focusing on what an E-Purchasing actually means, how it is carried out and its overall contribution to the business in the next decade. The introduction of information technology has brought dramatic changes in the business operations. In spite of the huge investments were fabricated by the business organizations in the action ability planning arrangement implementations they could not get appropriate advice for authoritative able business decisions. But the placing of 'e' in front of any process or function proved to be the magic formula for the untold success and the rapid returns for the organizations. One such example to give is E-Purchasing. E-Purchasing is considered as the basic component of an e- procurement capability. Through e-purchasing the business organization can automate and extend the manual buying processes right from the creation of the requisition through to payment of the suppliers (Biechler, 1997). Thus the process of using of internet facility by the business organizations for purchasing goods and services is referred to as e-purchasing. E-purchasing essentially involves the buying of goods and services via internet. In other words it can be told as a system using information technology to streamline the purchase of goods and services in order to reduce costs. The internet can perform all the steps required manually for performing the purchasing function including ordering, payment and delivery. To avail this so many online banking services have been introduced by the financial institutions such as electronic bill payment, and funds transfer, so that the business can improve its operational efficiency. In accession to this the business alignment can use e-mail as a accelerated and reliable way to acquaint with suppliers or to acquire and acknowledge to chump queries like quotations, information, acquire orders, assassinate deliveries, and aggregate ante from the customers. The e-business can also make the operations of business effective through the greater use of electronic bookkeeping and records management. Thus the supplies received through internet helps to reduce the storage cost and the space required for the goods in the business organizations and thereby serving the customers faster and more effectively (Chia, 1998). E-purchasing is usually referred to as a user-friendly, Internet-based purchasing arrangement that offers e-purchase adjustment processing and added authoritative functions to the buyers that after-effects in added operational efficiencies and abeyant amount accumulation to the business organizations (Breite, 2001). The e-purchasing ability provides the Business organizati

Socratic dialogue Essay Example for Free

Socratic dialogue Essay 1. Meno is among the Socratic dialogues that were inscribed by Plato early in the Fourth Century B. C in Greece. Plato wrote the article in an attempt to determine the befitting definition of virtue as he understood it. He wanted to come with a common meaning of virtue which applied evenly to every particular virtue; this he succeeds with the use of the dialogue between Socrates and Meno. The dialogue between Meno and Socrates tries to define what aspects makes a human being good and what makes him or her bad. Plato as well introduces another theme in the talk anamnesia. Anamnesia suggests that human soul is eternal and it understands everything, and merely recollects for the purpose of learning. The article brings out the ideological difference between Meno and Socrates. 2. Meno first points out that virtue is different from person to person but Socrates believes there is a common definition for all. Socrates rejects Meno’s assertion that virtues depends on factors like age and gender. Meno secondly suggests that the capacity to govern well (Plato, 2009) could be a virtue to all. Socrates mentions to the slave master, Meno, that governing well can never be a virtue of a slave, since he would then not be a slave anymore. Meno also suggests that virtue is yearning for fine things and the influence to get them. Socrates notes that this brings about another dilemma- a lot of people don’t recognize what is evil. 3. Socrates drew geometric shapes on the ground to articulate how a slave is originally ignorant of finding double the square area. Socrates explains how, before he randomly picked the slave boy from Meno’s entourage, the slave boy had spoken well and fluently on the topic (Plato, 2009). Socrates remarks that the numbing he effected on the slave boy did not harm him. Afterwards he draws another square shape diagonally; the slave boy can now observe that adding horizontal and vertical lines from the square corners, the area created is double the size. Socrates gets the slave boy to concur that the area is doubled and the slave boy admits to â€Å"spontaneously recovering knowledge from a previous life. Witnessing the slave boy example, Meno finally concurs with Socrates in his â€Å"innate† theory (Plato, 2009). 4. Virtue is something that someone learns from the environment that he or she has been brought up in. Sometimes the degree of holding on to a belief as being true depends on how seriously the subject matter is taken in the society one is brought up in. Knowledge and virtue are closely related but can be mutually exclusive. When a child grows up he or she learns new things by observing the environment, and based on his observations will decide what is virtuous and what is not. This is mostly based on his reaction to the society’s treatment or punishment of alleged vices. When he or she grows he forms his own opinion of what is good and what is bad, based on his interactions in life. Reference: Plato. (2009). Meno. Arc Manor LLC.

Essay --

This is the retake part of English article assignment. The requirements of this part are to write opinion about two articles related to Macro Economics and two articles related to Law, as well as a personal comment about Saunders’s Research methods book students had to read for Methodology, evaluating its educational value, as well as pointing out its weak and strong points. The students should mediate whether they like the article or not, if it’s related to lectures in the class or contradicts it, also if it illustrates something. The article chosen should not be older than 6 months and the students have to write their own comment about the article based on their knowledge built during their studying of the courses. 2. Macro Economics articles A. Comment on article 1 Globalization became an important aspect in the international economic relations. I chose this article and liked it because it discusses one of the important issues that international economic relation face, which is globalization. In my opinion it’s not only a problem, but it could be useful to certain countries, yet it could destroy the fair competition in some countries. To me, if there was no barrier or limitation for the globalization, people might stop buying the local product, which means the gross domestic production will decrease leaving the country in an economic loss. Because of globalization, most of the countries in the world will no longer concentrate on the local markets. Their focus became on regional or even world markets. It also changed the way they produced domestic goods. Just because a country might have the resources and ability to produce a particular commodity no longer means that they will produ... ...heart which gives no space for creativity. In my opinion as a student I think that the books we study should be interesting and leave a space of creativity for the student because we have many lectures and we need to study a lot of book and it is very hard for most of us to study all the books by heart, that is why the study books should be written in way that allows all the students to read it and understand the content to be able to write the idea in their own way and not just copy pasted text from the book. As a conclusion I see that the book has a rich content for those who want to be specialized as market researchers because of its intensive information but I think it would be better if we could learn the research methods in more general ways that we understand and can help us in our future jobs not just theoretical details we forget after finishing the exam.

What is the meaning of Women Empowerment?

In the middle of the 18th century, women empowerment was greatly demonstrated through boycotts and uprisings. Not only women from the lower class suffered, but women from the middle class suffered as well. Lower class women who were working in factories would work the same amount as their male counterparts, get constantly mistreated and would still get paid lower than men. Middle class women had to always listen to their husband and never go against them. There were a lot of stereotypes between the freedom of men and women. Because of these stereotypes, this caused women to rebel and most women were very well aware of their subordinate status in their community and applied several feminist movements. One women who showed high representation of women empowerment was Abigail Adams. Abigail was the wife of president John Adams and had five children. Since she was married to the president, she was always left alone at the house taking care of all her five children as well as their farm. Since her husband was hardly home, she got very bored doing the same activities everyday. Abigail indicated many concerns, through a letters to her husband, about women and how they are being treated in society. Abigail wrote several letters to her husband, but one of her letters stated that â€Å"Remember the Ladies, and be more generous and favourable to them than your ancestors. Do not put such unlimited power into the hands of the Husbands. Remember all Men would be tyrants if they could. If perticuliar care and attention is not paid to the Laidies we are determined to foment a Rebelion, and will not hold ourselves bound by any Laws in which we have no voice, or Representation.† He letter was one of the first steps to to fight for women's rights and freedom. She exclaims that men should not have all the power in their homes because they would all become oppressors. Abigail also told her husband that if women did not get equal rights, they would rebel and not pursue the laws where they had no voice or representation in. Lastly, she emphasized the fact that John Adams needs to remember the rights of women when the Declaration of Independence was being written.

Attention Getter Essay

Nowadays, many tragic accidents happen everywhere and this situation is alarming. Rate of accidents keep on increasing from day to day not just in the cities but also in rural areas. All of these accidents have made many people lost their families and loved ones. It is very pitiful when we get news about accidents which happen every day from newspapers. This shows that many people suffer when accidents happen to their family or relatives. Greetings: Good morning everyone. My name is Apollo Thesis statement: Today i would like to give a speech about the causes of happen road accidents. Summative Overview: Here are some causes of the road accidents happen such as: drink and drive, using cell phone while driving and teenage drivers. Benefit: It we know the causes of road accidents we can become more responsible and more careful to avoid road accidents/ those causes are reminds us to be more responsible to not only ourselves also the passenger in our car. Point 1: Drink and drive First of the causes is drinking and driving is the leading cause of car accidents. Driving while intoxication is dangerous, because drinking increases your inhibitions and self-confidence but lowers your driving performance and your ability to focus. In other words, alcohol impairs the decision-making ability of the brain. For example, when people get drunk, they do not even think they are drunk. They may feel like they can do anything. But they cannot. Many accidents occur because of drinking. These accidents involve mostly one car, but other people are killed by drunk drivers. People have to be educated about drinking and driving, so they do not kill themselves or innocent people on the road. Point 2: Using cell phone while driving The second point is using cell phones while driving is also a cause for car accidents. When a cell phone is used while driving, it distracts the attention of the driver, leading to car accidents. While using a cell phone  many people tend to miss the traffic signals, not really concentrating on driving. The process of dialing or answering the phone can make them lose control of the vehicle as well. Even though the driver is looking at the road, he or she can easily get distracted by the conversation. This can result in fatal accidents. Point 3: Teenage drivers Another cause of road accidents on the road is teenage drivers. Some teenagers cause fatal accidents, because of immaturity and lack of experience. Teenagers are very impulsive. Although not intending to hurt anyone, they sometimes drive very aggressively. It is not difficult to find teenagers driving with one hand on the steering wheel, seat pushed back, and with loud music playing. In traffic they go wild, trying to seek attention. They underestimate the risk of what they are doing. All these acts result is serious consequences on the road. Many accidents of young drivers result from their own mistakes. It will cause a psychological shadow in their future. Conclusion Re-thesis statement + summative overview: As conclusion, all this ways which are drink and drive, using cell phone while driving and teenage drivers are the causes of road accidents by avoid those causes we decrease the road accidents in our country and make a good image for the tourist who come to our country Benefit: We can learn to become more responsible to our passage it will help decrease the number of road accidents happen. By the way decrease the road accidents we can save more people . Clincher: By avoid road accidents we are not only saving our own life we also saving other people life too. Life is a gamble. You can get hurt, but people die in plane crashes, lose their arms and legs in car accidents; people die every day. Same with fighters: some die, some get hurt, some go on. You just don’t  let yourself believe it will happen to you!

Historical Method essays

Historical Method essays History is the study of the past. For historians the past dates back to 4,000 B.C., when events were first marked by writing, until present day. In its content history is everything. Historians spend their whole lives figuring out which events are more substancial than others. In order to achieve this, the historical method is put into practice. A problem solving technique using the gatheration of data, classification, interpretation and the most essential step, writing and teaching. The first step to studying the past events is gathering data. There are two types known as primary and secondary resources. Although both play an important role in gathering information, primary is the one you can not omit. In order to decipher which is primary and which is secondary there is a criteria that must be met. Person and time are the two categories under criteria. An example of primary resources would be a journal entry written by a person during that specific event. A historian could use a victim of the Holocausts diary as a primary source. Being that the victim experienced those actual events. Secondary resources would be a text book or magazine article written about a past event. The writer however, was not present at that point in time. Secondary resources eventually evolve into primary. The second step deals with classification. Every historians way of classifying is different. Their frame of reference is based on genetics and their environment. The way a person is raised to believe in certain aspects or taught by the people around them determines their point of view. The first way to classify events is chronologically. A historian might take World War II for example, and list all the events from when the war began to the final battle that ended the war. Another approach is concepts and ideas. A historian might group events according to religious aspects, social, economical, environmental, etc....

Synonyms for Clothes

Synonyms for Clothes Synonyms for Clothes Synonyms for Clothes By Mark Nichol Words that refer collectively to one’s clothes have an origin in the sense of equipment or preparation; here are a dozen words available as alternatives to clothes. Apparel, ultimately derived from the Latin verb apparare, meaning â€Å"prepare,† started out in English as a verb but then came to be associated with clothing (as well as a ship’s rigging); apparatus is related. The origin of attire is the French word atirier, meaning â€Å"equip† or â€Å"prepare†; it, too, began as a verb. Clothes comes from the Old English plural of cloth. (When this sense became rare, cloth acquired a new plural: cloths.) Costume, from the Latin word consuetudinem, meaning â€Å"custom† or â€Å"habit† (costume and custom are cognate), was later associated with one’s style of dress. It is now mostly associated with clothing worn by performers or partygoers. Dress, which originally meant â€Å"prepare,† derives ultimately from the Latin term directus, meaning â€Å"direct† or â€Å"straight,† and later became a noun as well as a verb. The French term garnement, from the noun garner, meaning â€Å"adorn† or â€Å"provide† (also the source of garnish) was adopted into English as garment. Habiliments, from the Old French term abiller, meaning â€Å"equip† or â€Å"prepare,† originally referred to weaponry but came to pertain to characteristic attire, such as an outfit worn to identify a person’s occupation or tacitly prescribed clothing that is appropriate for a specific occasion, such as a formal-dress event. (Related words are able and ability, billet, habit, and habilitate.) Outfit originally meant to prepare and supply a sea expedition, then later became a noun referring to equipment and items required for such an undertaking by sea or by land and, by extension, to clothing. (It now also informally refers to a group of people.) The archaic word raiment derives from an Old French word areement, the noun form of the term areer, the origin of the English verb (and noun) array. Vestments comes ultimately from the Latin verb vestire, meaning â€Å"clothe,† by way of Old French; it’s related to vest. (Vestibule is unrelated, though the financial sense of vest, and the root word in invest and divest, are cognate, deriving from a sense of vestire that pertains to surrounding oneself with something figuratively as if putting on clothes.) Wardrobe, from the Old French word garderobe (and the dialectical variant warderobe), originally referred to a dressing room, then to one’s collection of clothing and later to a piece of furniture for storing clothing; the senses derive from the French warder, meaning â€Å"guard† or â€Å"keep,† and robe, which was directly borrowed into English to refer to a garment. The French form of the word has been used in English but is rare. (The connection between g and w in French words used in English is also seen, for example, in guarantee/warranty and Guillaume/William.) Wear, from an Old English term meaning â€Å"clothe† or â€Å"cover up† (and related to the ward in wardrobe), is generally used in combination to refer to a particular type of clothing, as in the terms sportswear and underwear. Slang terms for clothing include duds, garb, get-up, rags, rig, threads, and togs. Want to improve your English in five minutes a day? Get a subscription and start receiving our writing tips and exercises daily! Keep learning! Browse the Vocabulary category, check our popular posts, or choose a related post below:Apply to, Apply for, and Apply with8 Proofreading Tips And TechniquesRite, Write, Right, Wright

American Empire, Oil and Global domination (The American Empire Essay

American Empire, Oil and Global domination (The American Empire Project) - Essay Example However, every time America had a solid argument which it presented to the world and made it appear to everyone that America's involvement is imperative either for its own security and defense or for the betterment of this world as a whole, let alone the consideration for devastations it brings to the world and innocent people on whom the war either declared or undeclared is imposed. The question that is raised by the world is that is it necessary for America to harm others in order to maintain its peace and security, or behind such arguments US is nurturing and fostering the concept of maintaining the US power and dominance over the world by controlling the world oil reserves and influencing the major oil producing countries. This paper exposes the arguments presented by United States for its invasion in Iraq, highlights the concept of American Empire with a background to reasons behind the major wars it has participated in and finally envisions the real behind the scene reasons and causes for the Iraq invasion. According to Burbach, Roger and Jim Turbell "Concentrating on terrorism for electionprovided an opportunity to highlight Bush's War on Terror and the need for patriotic Americans to rally behind the flag to support their President.Unfortunately, Osama Bin Laden, the terrorist who had rained fear down on America on 9/11, could not be found. They needed to find a new terrorist to portray as evil incarnate. Saddam Hussein fitted the bill."1 Iraq war was not only about Saddam Hussein, it was much about oil and control over the Middle East region. Middle East is the heart of world oil production where exists huge oil and energy reserves that are imperative for United State's well-being. According to Kofi Annan the UN Secretary General, there were no justifications for the use of military action against the Iraq.2 Iraq was not at all a threat to the Unites State's national security. Infact, United States had plans to invade Iraq for oil reserves even several months before the attack of September 11. According to Sunday Herald, the United States promoted the use of military action against Iraq about five months before the September 11 attack in order to control its secured oil supply in future.3 United States had already realized its ever increasing demand and declining supply for oil and it had already planned to invade Iraq which was the second largest supplier of oil to the world, about which Everest said, "Overthrowing Saddam Hussein, creating a client state in Iraq, and opening up Iraq's economy are key components of a much larger, multi-faceted global agenda in which energy resources play a crucial role"4 The event provided United States a great chance to set its foot in countries having huge energy reserves that was the only way to control the world oil supply and reserve a continued secured supply of oil for itself all behind the mask of national security and self-defense. However, the United States has always denied that its invasion of Iraq was for the purpose of imperialism and global dominance by means of controlling Iraq's discovered and undiscovered precious oil reserves, yet it is evident to the world that the real agenda behind the Iraq invasion was Oil, not the issue of American national security. US PRETENCE FOR WAR ON IRAQ The US had many

Consider MOOCs and discuss whether they are a revolutionary Essay

Consider MOOCs and discuss whether they are a revolutionary breakthrough in education or simply a fad - Essay Example Traditional forms of learning like classroom settings and direct lecturing are slowly fading (Sharpe 27). In this context, we can say that advancement in technology remains the main attribute for these dynamics in the social aspect of education. On the other hand, the aspect of globalization also contributes towards witnessed shifts in education patterns. Students from various parts of the world are converging at the best learning institutions in search of knowledge (Sharpe 34). In this case, increase in student population necessitates changes in order to adjust service delivery programs. Presence of cut-edge technology facilitates the development of such desired service delivery systems. This essay appraises a developing program within the education sector in terms of its impacts and expected future trends and resourcefulness. In 2010, leading universities in Europe and America were striving to formulate new learning policies meant to address increasing influence of globalization. S takeholders wanted to restructure education models, especially within institutions of higher learning. This development largely focused on the role played by teachers in modern learning environments characterized by huge student-teacher population ratio (Adrie and Finegan 72). As a result, researchers from the University of Michigan and Stanford University conducted objective evaluation on existing teaching methods. Towards the end of their research articles, they postulated appropriate recommendations meant to deal with new developments in the education sector. As a result, the two research bodies termed massive open online courses, abbreviated as MOOCs as the most suitable educational program (Bowen 45). This program aimed at developing a method meant to address the need to change teachers’ roles in learning activities. In addition, MOOCs will serve as the best technique of dealing with an increase in student population. In actual practice, the University of Miami in 2012 f eatured as one university adopting a massive open online course program. Subsequently, MOOCs rolled into other parts of the world like Australia, where the nation’s university of South Wales adopted a course of computing using the MOOCs program. Currently, extrapolated research on education methods suggest that open online courses can literary feature as knocking down campus boundaries. According to one researcher, who is a professor of research at Stanford College, the scholar says that MOOCs will take over as new methods of delivering knowledge to students. Big breakthroughs happen when what is suddenly possible meets what is desperately necessary (Friedman 01). In order to appreciate the role played by MOOCs, we will evaluate its components in functioning and design. Creation of MOOCs seeks to address the increasing number of interested learners within academic environments. In this context, technical developments of MOOCs programs seek to facilitate timely and professiona l delivery of information to a large student population. MOOCs use internet connectivity in creating interaction platforms through collaboration groups or peer-reviews (Bowen 65). On the other hand, delivery of information integrated appropriate feedback mechanisms meant to assess the success of learning among the student population. In this case, MOOCs has a feedback provision, which involves automated online assessment through exams and quizzes. At the end of the assessment process, students’

Marketing's role is to encourage consumption (Lazer, 1969). This Assignment

Marketing's role is to encourage consumption (Lazer, 1969). This statement is as true now as it was in 1969 - Assignment Example The main role of marketing is to encourage the consumption. In order to increase the consumption of a product or service the company has to first of all develop interest in the minds of the consumers to go for the product. This is the context where the modern definition of marketing is applicable. â€Å"Marketing is the process of interesting potential customers and clients in products and/or services†. The interest created in the minds of the prospective consumers compels them to go for the product and later increases the consumption to a grater extent. A company has to concentrate on the following four components of marketing mix to encourage the consumption. They are products and services, promotion, distribution and pricing. These are the four sensitive areas that a company has to sensibly deal with while marketing is carried out to increase the consumption. When any one of these areas is not properly regarded it is going to affect a company’s growth as it adversely influences the interest of the customer to consume the product and will result in the decline of overall consumption. The paper under discussion tries to prove that the statement ‘Marketing’s Role is to Encourage Consumption’ is as true now as it was in 1969. The main role of marketing is to encourage the consumption even though it has many other functions. All these functions mutually focus on encouraging consumption and thereby increasing the sales and profit. A company’s marketing efforts are directed at the objective of encouraging consumption through customer satisfaction and customer relationship. Maintaining a satisfactory relationship with the consumers is necessary to keep the consumers as customers for ever. A good customer relationship is essential for encouraging the volume of consumption. When a company tries to develop customer relationship, the company actually wants to retain the customers as long as possible. A marketing company would go on

Project Management Essay Example for Free

Project Management Essay The objective of this project is to open a second office for Better Health Care Centers within the next 18 months and within the $1.5 million budget on time and on budget. The projects environment as it relates to cultural /social is one of healing, health and wellbeing of the population or community. The expansion of the facility will impose little impact on the environment as we will be using an existing building and all green practices and policies will be instituted when possible. For the general management of this project I will be using construction managers, contract managers and lawyers, and there will be another manger in charge of the hiring of staff and all of those people will be reporting to me, the general project manager. Since this is such a long and expensive project there will need to be tight controls on time and resources to ensure that there is little to no waste. The project will be segmented into phases that will be completed or almost complete when the next phase of the project begins. This will enable better control of the project as opposed to doing things out of a logical order. You would not furnish the building before you install the carpet. The amount of phases and the degree of control of each phase will depend on the size complexity and impact of the project. The phases for now, will be simplified and will go something like this; the initiating phase where all of the proposals and budgets for each phase will be defined will be set. The next phase will include the planning process. Where all of the basic needs of the project will be defined and the management team is built and phase assignments are delegated. Then the work starts with the execution of the project and the individual projects begin in earnest. This phase has some overlapping projects and simultaneous projects there will be very few times when there is only one project working at the time. During this phase the acquisition of building space, contracts with insurance companies and outside laboratories and radiology facilities and hospitals will be negotiated. The hiring of contractors and th e finalizing of floor plans and choosing equipment and other materials and supplies are decided upon. This is the longest phase and tight controls on budget and time are most important. There will be a need for four managers to run different areas of the project they will be in control of their budget and reporting to the general project manager and to the shareholders. Each manager will have a staff of people to do some of the work according to their expertise. There will be a legal team, a construction team, a design team and a team to organize meetings, a team for the overall budget an accounting team. In the final or closing phase the work picks up pace and crunch time becomes a reality. In this phase many projects will be complete while others are winding down and a few will just be starting. In this phase the hiring of the office staff, physicians and office mangers will be finalized and contracted. In this phase the finishing touches will be put in place and the equipment will be delivered and set up. The computer systems will be installed and training of the new employees will commence. For this project the manager will need excellent time management skills and the ability to communicate effectively with second level managers and project leaders and staff so that the efficiency of the project has as few set back and errors as possible. The project manager will also need leadership skills. With out a good leader nothing gets done efficiently or effectively. Project managers are assigned to achieve the project objectives. This role requires flexibility, strong leadership. Good judgment, negotiating skills and a solid knowledge of project management practices. The project manager must have attention to detail while managing from an overall management prospective. The project manager is responsible for the success of the project and is in charge of all aspects of the project. The project manager responsibilities include: Developing the management plan and its related components. Keeping the project on time and on budget. Monitoring, identifying and responding to risk. The manager is also responsible for timely and accurate reporting of project metrics. The project team is made up of the manager, and other team members that carry out the work but not necessarily involved in management. Each team has its own knowledge of their specific subject matter. It is necessary for all teams to meet regularly to go over any problems and to update the project manager on each teams progress. References: PMBOK guide forth edition project management institute. Fourth edition 2008 CTU online live chats Granville Jones Instructor http://www.techrepublic.com/article/encourage-success-by-following-pmis-knowledge-areas/1051548

Heart Of Darkness :: essays research papers

Each person has a different definition of what the term ‘remarkable’ means; each unique definition, holds a significant link to the other. This link is that the term is always given to a person that holds certain characteristics that are superior to the average individual. The set of characteristics that are observed tend to subscribe to the specific set of values of the person issuing the remark. Marlow, the main character in Joseph Conrad’s Heart of Darkness is able to assert that Mr. Kurtz was a remarkable man. This is true because of the unique values that Marlow possesses, which allow him to assert Mr. Kurtz as a remarkable individual. Through the actions and words of Mr. Kurtz, and other individuals Marlow encounters, Marlow is able to gain an overall perception of how characteristics of Mr. Kurtz deem him remarkable. Through the development of the narrative, Marlow establishes that Mr. Kurtz does not want to return to society, he does not want to return to the world were people judge one another based on social issues. â€Å"Kurtz had apparently intended to return himself, the station being by that time bare of goods and stores, but after coming three hundred miles, had suddenly decided to go back, which he started to do alone in a small dugout with four paddlers, leaving the half-caste to continue down the river with the ivory.† (Conrad Pg. 52) Instead Kurtz returns to the wilderness and is able to judge himself. â€Å"I went no more near the remarkable man who had pronounced a judgement upon the adventures of his soul upon the earth.† (Conrad Pg. 118) Marlow looks upon these two actions as remarkable feat. Kurtz, through Marlow’s eyes was able to pronounce a judgement based upon his own actions rather than having society dictate them to him. Marlow realizes that in order for Kurtz to pass judgement on himself, Kurtz must have been courageous, a value that Marlow lacked. â€Å"I was within a hair’s breadth of the opportunity for pronouncement, and I found with humiliation that probably I would have nothing to say.† (Conrad Pg. 119) Marlow clearly illustrates that on his own deathbed he would not be able to express his own judgement, despite the opportunity to speak, he would just hide like a coward. Thus Marlow is able to pronounce that Kurtz is a remarkable individual because he has a value, courage, that Marlow and many other individuals do not posses.

The Future Economy

Imagine yourself living the dream of being an entrepreneur. You are a business man of the 21st century; you have a popular product that many firms want to purchase. You feel financially secure with your future because of the amount of buyers for your product. Then 5 years go bye, and the once abundant number of firms has dwindled down to a couple of major corporations. You try to think to yourself how did this happen? You then realize that all the little companies that fought for your business, and helped you get the highest capital are gone. They were acquired by or merged with larger firms. You know that when this happens the market gets smaller and there are less people to buy your product. With fewer options of companies to sell your product to, comes a smaller amount of profit for you. Two more years go bye and the market gets more concentrated, the remaining giants can now offer you any price they want. If you choose not to accept it, you don†t sell your product. Your dreams of being your own boss and selling a quality product for a fair price are fading away. Some people may think that this story couldn†t happen, but mergers and acquisitions take place everyday in the corporate world. This story that I just told you about is real. Instead of being about business men of the 21st century my article was about the beef cattle farmers of southwestern Wisconsin. The article talks about Virginia-based Smithfield foods, acquired American Foods Group and Packerland Holdings Co. Smithfield is the nation†s largest pork processor; they have a 20% market share. Besides the two recent acquisitions Smithfield also has ownership of Cudahy-based Patrick Cudahy Inc. As a result of this Smithfield will now be the nation†s forth-largest beef processor, with a 9% market share. Smithfield†s merger is part of an overall consolidation among the nation†s larger food processors, which includes the companies of the nation†s beef industry. Wisconsin is known to many people as the dairy state because of our cheese and milk production. While this is true, when the dairy cows get older and there milk production drops they get sold to beef processors. Due to this, Wisconsin†s number of beef cattle has been increasing. Wisconsin had 1.29 million dairy cows as of July 1, according to the Wisconsin Agricultural Statistics Service. The state had 260,000 beef cattle, a 2% increase from July 2000. If I had the other three firms information on the market value they have. I could figure out if the market is highly concentrated or somewhat competitive using the Herfindahl-Hirschman Index which you showed us in class. Wisconsin beef producers are definitely concerned about the latest news of Smithfield†s plans involving Packerland and American Foods. Tom Thieding, a spokesman for the Wisconsin Farm Bureau Federation said, â€Å"Any time in a consolidation, you just lose the marketing and price opportunity.† State Agriculture Secretary Jim Harsdorf also expressed his concern about the consolidation saying â€Å"we need to make sure there†s still opportunity and competition out there, or the producers are the ones who are going to see their margins cut.† The nation†s livestock sector is already highly concentrated, a point that is made repeatedly by farm organizations and others. Serious questions have been raised about vertical and horizontal integration and market power that puts small livestock producers at a disadvantage and puts consumers at risk. The farmers know that the Smithfield acquisitions further concentrate U.S. meatpacking and eliminate an important competitor in the purchase of livestock, very likely resulting in lower prices for producers. Smithfield believes that it must consolidate in order to keep up with other companies and to provide for their customers. But to make a profit the beef and pork processors will be under pressure to pay fair prices to farmers. But the farmers have a very important role in this equation, they supply the product. If the farmers don†t have an economic incentive to produce, the processors will not be able to deliver to their customers. Smithfield†s plan to buy American Foods could be reviewed by the U.S. Department of Justice to address the possibility of an antitrust. As we learned in class the antitrust policy tries to promote competition and discourage collusion. But Smithfield believes that American Foods is small enough that the deal won†t need regulatory review. The deal with Packerland foods was reviewed and approved by the federal government. Smithfield believes that they are a growing company; they will not approach the size of industry leaders IBP, ConAgra and Excel. To beef producers the debate is not theoretical. Mike Riechers, a cattle farmer in southwestern Wisconsin said he believes the competition among cattle buyers dropped in 1998 after Packerland took over the operations Murco Foods. With Smithfield buying Packerland and American Foods farmers are concerned that competition could drop even further. In conclusion, consolidation is taking many other forms: â€Å"mergers,† â€Å"partnerships,† â€Å"integration,† and similar terms are being used to describe a variety of business arrangements that result in the same final product: fewer people making decisions in agriculture. In many ways, agriculture is just catching up with the rest of the business world, which has been consolidating at a record pace for the past several years. Meanwhile the farmer will become a grower, providing the labor and often some of the capital, but never owning the product as it moves through the food system and never making the major management decisions. Most consumers already put no thought into the financial cost of growing the hay that fed the cow that ends up on your plate.

Freud and Erikson

This first paper is going to be about a case study on a 7 year old kid named Gary. Gary is wheelchair bound and has Muscular Dystrophy and has been home-schooled until now. He seemed to be doing fine in school, but he has been crying after school and not wanting to go monday mornings. We have to try and figure out why Gary is feeling this way. I will be using and comparing Erikson’s Psychological Theory and Maslows Hierarchy of Needs to analyze why the case study subject might be acting this way. Erikson’s Psychological Theory is based around Freuds’s Stages of Development, but with further stages and not always based around sex and aggression like Freud uses. Erikson’s Theory contains eight stages: Trust v. mistrust (birth to two years of age), autonomy v. shame/ doubt (two to four years), initiative v. guilt (four to six years), industry v. inferiority/ diffusion (six to twelve years), identity v. identity confusion (adolescence), intimacy v. isolation (young adulthood), generatively v. tagnation (middle adulthood), and ego integrity v. despair (late adulthood to death). The first four stages match up pretty well with Freud’s Theory’s stages, with an additional four stages about adulthood at the end. Two big things about Erikson’s Theory is that success builds on previous stages and that failure is cumulative (Morrison, lecture, 2011). I can apply Erikson’s Theory to the case study with Gary in a couple of ways. The first observation I can make is that Gary is his wetting the bed problem. If he hasn’t done it in years, why is he doing it now? Gary has probably failed to succeed in the autonomy v. shame stage of development. It doesn’t say how long Gary has been in a wheelchair, but my guess is quite awhile. Even if it was after his toilet training years, he had to re-learn how to go by himself when he was given a wheelchair. This might have gone smoothly when he was at home with the help of his loving and supportive parents, but he probably doesn’t trust in teachers or aids to help him if he needs it. He feels ashamed of himself for not being able to go flawlessly like at home, and these feelings of shame are causing other problems in school also. This GREATLY affects his self esteem levels and disturbs the rest of his school life. Another angle of looking at Gary’s problems is he isn’t succeeding in the industry v. inferiority stage. This stage is about learning in school and communicating and is a very social stage (Morrison, lecture, 2011). SInce Gary is in a wheelchair, he can’t participate in regular activities in P.  E. classes. He has to have adaptive P. E. based on him not being able to walk. Watching the other kids playing on the basketball courts and playing football and stuff leaves him feeling left out. He isn’t building skills for a teamwork mentality like everybody else. He feels left out of the fun and probably puts himself lower than the rest of his peers. This would greatly hurt his self-esteem and competence. This could be an explanation for him crying after school and just not wanting to go Sunday nights. Although Erikson’s Psychological Theory can explain Gary’s problems in terms of missed of problems in developmental stages, Maslow can explain them more generically with his Hierarchy of Needs. Maslow’s Hierarchy of needs has five stages, starting with the most primitive working towards more finite: biological and physiological needs (food, water, shelter, warmth), safety needs (protection and security), belonging and love needs (family, affection, relationships), esteem needs (achievement, status, responsibility), and self- actualization (personal growth) (Morrison, lecture, 2011). Using Maslow’s hierarchy of needs, I can analyze Gary and determine that it seems as if Gary isn’t fulfilling his esteem needs. He seems to have a low self esteem and a low sense of accomplishment. This is probably because he can’t do the same P. E. activities as the rest of the kids. Just being around a lot of kids that can walk and do things he can’t is probably the main reason for his sadness and not wanting to go to school. When he was at home all day, he had his parents to comfort him if he ever had questions about other kids. His parents might have actually over protected him, as in Gary wasn’t prepared to go to public school because his parents sheltered him from the truth of the real world and wasn’t ready for it. Since Gary is having trouble with his esteem needs, he cannot feel accomplished and move on to his self- actualization needs. He can’t grow as a person until the lower level needs are met. There are a lot of theories that people can use when analyzing peoples’ problems. But looking at Gary’s problems, Erikson’s Psychological Theory and Maslow’s Hierarchy of Needs were the ones I felt like could explain why Gary is having problems the best. Not every theory is applicable to every situation. These two theories made sense to me and I believe explained his problems the best out of all of the theories we have looked at in class. Between the two I used, I believe Erikson’s Psychological Theory explains it better than Maslow’s Hierarchy of Needs, but they both have some good points in this case study.